Spare parts steam tap QuickMill
Steam pipe grip Quick MillWith this handle you can turn the steam pipe in and out without burning your fingers!
€ 2,95
Pipe connection 1/8" M x 5mmThe coupling is self-flapping and suitable for Quick Mill 3x5 hoses.
OT0810RA€ 5,95
Overhaul kit steam pipe Quick MillIncluding:
2x o-ring spindle
2x o-ring steam pipeFor series steam pipe with 1 o-ring in the spindle and also for series that have 2 o-rings in the spindle.
The kit is without the valve, in most cases is it not necessary to…€ 6,75
Mounting bracketBracket to attach the steam pipe to the brew head of all new models with Quick Mill group.
Height 58mm, could be lower for olders models 800 series.
FE0900SRN€ 7,95
Steam pipe replacementDefective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…
€ 11,95
Steampipe Quick Mill 3000 seriesIf the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 3000 series. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…
€ 26,95- Steampipe Quick Mill 800 series
If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…
€ 26,95 
Steam pipe Quick Mill Upgrade INOXVersion of the EVO70 series with stainless steel pipe and 1 hole steam tip. The pipe is double-walled so that it does not get so hot and the milk does not burn the pipe.
This upgrade can be mounted in your 2800 or 3000 series…€ 69,95
