Spare parts Bezzera Strega
On this page you will find parts specific to the Bezzera Strega, a beautiful machine with a lever group.
- O-ring fitting steam tap Bezzera
This O-ring fits the fitting for the push tap of Bezzera. (Gasket between front panel and tap)
OR0114
All Bezzera models from 29/01/2014r29/01/2014
7496052€ 0,75 - Spring filterholder 58mm
For all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75 - O-ring steampipe universal
This ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95 - Button oval 17x13mm
For La Piccola Sara, Vibiemme Replica, Bezzara BZ, ECM Botticelli and others
For other parts of the switch see this page.€ 1,20 - Rubber steampipe 10mm
Prevent burnt fingers with this rubber cover for the steam pipe. For steam pipe with an outer diameter of 10 mm, tip for assembly: use a little bit of washing-up liquid so that the cover easily goes over the thickening of the…
€ 1,25 - Lubricant for filter holder (Portion)
With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50 - Pump suport Ulka€ 1,50
- Closing gasket OPV Bezzera (new model)
Closing gasket for adjustable overpressure valve Bezzera.
11 x 3 mm
BE 5493042
For Bezzera E61 machines > 30-10-2012
For Bezzera BZseries machines > 19-03-2013€ 1,75 - Spring OPV Bezzera (old model)
8 x 33 mm
BE 5471506.01
For Bezzera E61 machines up to 30-10-2012
For Bezzera BZseries machines up to 19-03-2013€ 2,45 - Closing gasket OPV Bezzera (old model)
Closing gasket for adjustable overpressure valve of Bezzera.
8 x 4 mm
BE 5493001
For Bezzera E61 machines up to 30-10-2012
For Bezzera BZseries machines up to 19-03-2013€ 3,55 - Filter water tank Bezzera
Filter for water tank ECM Mechanika/Technika III and Bezzera
1/4f
7374002€ 4,50 - Shower E61€ 4,95
- Pistonring Bezzera Strega (set of 3)
52x40x7mm
Set of 3 pieces.
For reassembling the piston, it is wise to order heat-resistant silicone grease or even better PTFE grease.
7491001
For Bezzera Strega, but fits also: Astoria Rapallo, Brasilia, Francino, Kees van…€ 9,95 - Safety valve E61 boiler 3/8
3/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95 - Pressure switch 16 ampère 1/4
Thread 1/4.
PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4
Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.
There is also a more solid alternative€ 19,95 -14%
Pump Ulka EX5 230volt€ 34,95 € 29,95-13%
Heating element 32mm 1250 watt with gasketThread: 32 x 1,5 mm
Length: 160 mm
220/240 volt
1250/1450 watt
For Bezzera E61 and BZ machines and ECM Technika/Mechanika 3
Bezzera code 5722240TP€ 38,50 € 33,50- Relay Bezzera€ 34,95
- Loxeal silicone Grease 4 with PTFE 100 gr
Loxeal No.4 silicone grease with PTFE is the best lubricant available for use in espresso machines (and other applications). The product is considerably more viscous than silicone grease and also lasts much longer in hot and wet…
€ 39,95 - Water tank Bezzera / ECM€ 49,95
- Steam tap "push" Bezzera
This allows you to convert your Bezzera from the normal steam / water taps to the so-called push taps. By operating the levers you immediately have water or steam.
€ 68,95 - Naked filter holder Bezzera Strega
Original Bezzera naked filterholder for Bezzera Strega.
Including 20 gram filter.€ 89,50