Spare parts Bezzera Unica

6x1,2 mm for INOX steam tips with male thread

This O-ring fits the fitting for the push tap of Bezzera. (Gasket between front panel and tap)

OR0114

All Bezzera models from 29/01/2014r29/01/2014

7496052

OR between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a teflon gasket available.

16 X 2 MM

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

This ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

QuickMill GO3000PG

Prevent burnt fingers with this rubber cover for the steam pipe. For steam pipe with an outer diameter of 10 mm, tip for assembly: use a little bit of washing-up liquid so that the cover easily goes over the thickening of the…

With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…

For Bezzera taps with quick/push steam tap

11x4x4

BZ 5496042

Closing gasket for adjustable overpressure valve Bezzera.

11 x 3 mm

BE 5493042

For Bezzera E61 machines > 30-10-2012

For Bezzera BZseries machines > 19-03-2013

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

CONICAL SEAL ø 12x5x6 mm

BZ 5494004

Y connector for silicone hose. 5mm

Also available in a more solid brass version.

Bezzera 7303033

∙ BZ07
∙ BZ09
∙ BZ10
∙ Galatea Domus
∙ Giulia
∙ Hobby
∙ Unica

Lelit MC532

Closing gasket for adjustable overpressure valve of Bezzera.

8 x 4 mm

BE 5493001

For Bezzera E61 machines up to 30-10-2012

For Bezzera BZseries machines up to 19-03-2013

Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.

Also available in a higher quality brass version.

Assemble with Loxeal or PTFE Tape or with an o-ring.

1/8m x 1/8f

7633625 BEZZERA

Head ø 13.4 mm - hole ø 10 mm

M4 with manual reset

Protector for lever switch,

BZ 7372507

ECM B7372507

Silicone group gasket, longer lasting material than the standard gasket.

For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…

M14x M13

Bezzera code: 5225416TP

nut ø 3/8 "F - height 18 mm - body ø 22 mm

5222823CM

4 poles 15 amp

For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others

Bezzera

50cm

1/8 F -> manometer

M12x1 -> t-fitting

ARCADIA (201704-Rev.06), B2000-B2006 (200604-Rev.03), B2013 (201407-Rev.00), B2013AL (201407-Rev.00), B2016 (201706-Rev.03), B4000 (200805-Rev.01), B6000 (201407-Rev.00), BZ02…

7633907 BEZZERA BZ07, BZ09, BZ10, BZ13, GALATEA, UNICA

overall length 47.5 mm
threaded pin M4
head ø 12x5 mmBZ 5260204DL

Bezzera BZ07, BZ09, BZ10, BZ13, BZ16,BZ40, GIULIA, MAGICA, MITICA, STREGA, UNICA

M12 bold

5978508 BEZZERA
5978508.01 BEZZERA

Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…

Probe ø 6x25 mm - Thread ø 1/4"M bsp

For Bezzera, Izzo/myWay, Rocket, ECM, San Remo, Lelit ea.

A199904679 Rocket
ELETSONTEMPII Vibiemme (VBM)
ELETSONTEMPPI Vibiemme (VBM)

Thread: 1 1/4" bsp
220 volt 1600 wattLengthe: 100 mm

Boiler La Piccola Cecilia

RDL Italia Maxi serie

Vibiemme Domobar Junior HX (Not Dual Boiler)