Spare parts La Scala Butterfly
- Screw cover ECM/Rocket M3x12€ 0,50
- Spring filterholder 58mm
For all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75 - Closing gasket spindle steam tap La Scala
Teflon closing gasket for the spindle of a La Scala tap. Replace this if the steam tap keeps leaking through the pipe.
Always replace the o-rings as well while you are at it.
7x3mm€ 0,95 - Blindfilter E61€ 2,95
- Silicon pipe 4x7mm 1m (standard)
If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95 -20%
-20%
Filter 2 cup 14 grams E61FILTER BASKET 2 CUPS 14G. H.24,5 EXTERNAL RIDGE 70mm AISI 304
For all E61 and other 58mm groups like Rancilio, Bezzera, Ascaso Prof, Lelit 58mm, Nuova Simonelli, Astoria, Wega, Marzocco etc.€ 4,95 € 3,95- Filterholder gasket E61 8mm€ 4,95
- On / Off switch universal
Main swicht for espressomachine, for example QuickMill 800 series, La Piccola Cecilia, La Scala, Expobar and many others. 4 fastons
Wiht internal light€ 4,95 - On / Off switch universal
Can also be used as a coffee switch. For QuickMill 800 series and many other espresso machines. 4 pins.
€ 4,95 - Shower E61€ 4,95
- Empty valve 1/4 low€ 7,95
- Drain valve Semi-automatic group
Drain valve for the solenoid of Semi-automatiic E61 brew groups
Thread 1/8 female
Lengthe 35mm€ 8,75 - Infusion valve complete 53mm
Upper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95 - Level probe boiler 120mm
The boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95 - Safety valve E61 boiler 3/8
3/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95 -21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50- Manometer boiler pressure (ECM/Rocket/La Scala)
D. 40 mm
For:
ECM/Rocket Cellini / Giotto
La Scala
And others
Rocket nummer: C229900837€ 19,95 -11%
Overhaul kit semi-automatic E61 brew groupEspecially for the semi-automatic E61 brew group of different brands (ECM, SanRemo, Grimac, Fiorenzato, La Scale, BFC and others)
Set for maintenance of the entire brew group, consisting of:
Shower Paper shim 0,5mm Filter holder…€ 22,50 € 19,95- Pressure switch 16 ampère 1/4
Thread 1/4.
PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4
Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.
There is also a more solid alternative€ 19,95 - Manometer E61 brew group White
Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 21,95 -14%
Pump Ulka EX5 230volt€ 34,95 € 29,95- Water tank ECM / Isomac / Pavoni
- La Pavoni Caffè Espresso
- La Pavoni Gran Caffè
- Isomac Venus
- Isomac Giada
- Isomac Maverick
- Isomac Viper
- ECM Milano
- QuickMill E61
- La Scala/Boretti197x70x274mm
IS000194
C639900382
C639900762€ 30,75 - Filterholder single E61€ 31,95
- Steam tap universal Premium
Including for the modern Giotto and Cellini machines, but also for use on other machines as a universal replacement for steam and/or water tap.
Please note that the button has a slightly different model than the original buttons,…€ 32,95 - Filterholder double E61€ 33,95
- Heating element 1" 1350 watt with gasket
Thread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 36,50 - Pressostat 1/4" with relais€ 42,95
- Steam/water tap "lever"
This allows you to switch your espresso machine from the normal steam/water taps to the so-called push or lever taps. By operating the handles you have instant water or steam. Suitable for mounting on your existing…
€ 49,95 - Base kit for water mains
Connect your espresso machine with vibration pump to the water supply without the risk of leaks? We have made a kit that allows you to easily connect the machine to the water supply, but with a solenoid valve between the pump and…
€ 54,95 -33%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 59,95- Control box boiler level RL30/2S/3R
10 pole level control box. Also suitable to replace a 9 pole box, pole LAMP can be left unused. When replacing an 8 pole box you can also leave EVEROG empty.
Gigar cod 9.1.40.61G
You can always send a photo of your current box…€ 84,95 - Controlbox boiler level RL30MICRO 8 poles
Control box for ECM / Rocket with level probe in the water reservoir. Note, 8 poles. If you have a 9-pole box, you can order a 9-pole box or 10-pole box.
Also suitable for:
The machines from Gruppo Izzo. ViVi and Alex Duetto…€ 84,95 - Control box La Scala GICAR 9.9.04.11G
GICAR cod. 9.9.04.11G
For La Scala/Symphony (Butterfly and Carmen)€ 109,95 - Controlbox boiler level RL1/1E/3C/F€ 169,95
- Control box / control panel Boretti/La Scala
GICAR cod. 9.5.28.65G 00.
For La Scala/Symphony (Butterfly), Fiamma RST (MARINA) and Boretti Barista€ 199,00