Spare Parts QuickMill 810 ESE servings
Screw brew head QuickMillAll QuickMill models, both ESE and ground coffee M4x8 stainless steel to fix the brew head to the housing.
VII26€ 0,75
Sleeve pressure pipe QuickMillSleeve to secure the pressure hose in the pump diaphragm of QuickMill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the QuickMills with an old model solenoid valve and also with the…
€ 0,75
Lubricant for filter holder (Portion)With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50
Pump suport Ulka€ 1,50
Spring water block QuickMill ESE podsSpring for the Quikmill espresso machines for ESE servings
Length 15mm
MO0810VNR€ 1,95
Water block QuickMillWaterstop for all QuickMill models. The water stop ensures that no coffee can flow back into the thermoblock, so it is important that this part is present in your machine.
SPCHI2X9€ 1,95
Filter sunction hosePrevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8
QuickMill PL0950FI
Lelit MC042€ 2,75
O-ring pressure hose / brew group QuickMill (set of 2)Set of o-rings for sealing the pressure hose in the brew group for the QuickMill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)
OR103V 2x
Also for the pressure…€ 2,95
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95
Steam pipe grip QuickMillWith this handle you can turn the steam pipe in and out without burning your fingers!
€ 2,95
Safety thermostat 167 degreesIncludes 2 sockets for mounting the thermostat to the wiring.
FU0800
We also have any new insulation available.€ 3,95
Clamp bracket pressure hose QuickmillClamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.
AC0900CB€ 4,95
Lamp QuickMill220/230v
SE0825A
SE03000
For the older versions of the 800 and 3000 series with a larger bulb (hole diameter 10mm)€ 4,95
On / Off switch universalMain swicht for espressomachine, for example QuickMill 800 series, La Piccola Cecilia, La Scala, Expobar and many others. 4 fastons
Wiht internal light€ 4,95
Piston ring ESE QuickMillFor ESE Servings (Pads/ Servings/ Cialde)
QuickMill 810, 3004 and 3012
Ascaso Dream ESE
OR147V +/- 43 x 3,5 mm€ 4,95
Purifier standardThe ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.
This purifier, is filled with resin granules and works according to ion exchange.
The standard…€ 5,95
Foots espressomachine (set of 4)Set of 4 suitable for almost all espresso machines. We recommend attaching them with super glue or super glue for optimal attachment.
d.22mm
h.10mmQuickMill GO03000PFN€ 6,50
Overhaul kit steam pipe QuickMillIncluding:
2x O-ring spindle
2x O-ring steam pipeFor series steam pipe with 1 O-ring in the spindle and also for series that have 2 O-rings in the spindle.
The kit is without the valve, in most cases is it not necessary to…€ 6,75
Coffee switch QuickMill 800 seriesWith coffee cup print, 6 pin connection, also usable for 4 pin situations. For example for QuickMill, La Piccola and many others,
QM code: IN0810PC€ 6,95
Handle filter holder m1010mm thread, nice shiny finish. Suitable for many brands of espresso machine, such as QM ESE, Vibiemme, Lelit, Franis Francis and others.
We recommend that you always check the thread size of your handle before ordering.€ 6,95
Pressure pipe Quickmill (steam tap - brew head)Hose between brew group and steam tap 800, 2800 and 3000 series.
Note: do not forget to order the 2 o-rings, these must be replaced in the brew groep!
L 140mm
TU0820RSR / TU03035RSDE€ 7,75
Mounting bracketBracket to attach the steam pipe to the brew head of all new models with Quickmill group.
Height 58mm, could be lower for olders models 800 series.
FE0900SRN€ 7,95
Pressure pipe (pump-solenoid) QuickMill 820/810Pressure pipe between the pump membrane and the solenoid valve of the QuickMill 810 and 820.
A new sleeve must be mounted on the side of the pump membrane: OT0800OV
On the solenoid valve side, this pipe can be secured with the…€ 8,95
Filter ESE Pods QuickMill / Ascaso#1 Standard (Espresso small)
#2 (Espresso large)
For modern QuickMill filterholder, when you have an older filterholder you can use the filters for La Piccola.€ 9,95
Steam pipe replacementDefective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…
€ 11,95
Thermostat QuickMill 105 degreesQM. 105 degrees, for older models with grey thermoblock.
TE0900C€ 12,95- Thermostat QuickMill 110 degrees
QM. 110 degrees for modern models (>-`04)
TE0900CR/TE0820CR€ 12,95 
Solenoid ODE / OLAB / BERGAMO / SIRAI22x29x28mm diameter 10mm
5VA/5W 230V
For:
ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO€ 17,50
Grid QuickMill 800 series€ 18,95
Cover QuickMill 800 series€ 19,95
Pulsor pump (QuickMill)Expansion valve / membrane for the pump of the QuickMill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8bsp…
€ 19,95
-17%
Overhaul kit QuickMill ESE servingsComplete overhaul kit for your QuickMill 810, 3010, 3012 and 3014:
Including: (original parts)
∙ Shower ESE
∙ Group thread ESE
∙ Water block
∙ Spring water block
∙ Piston ring ESE 2x!€ 29,75 € 24,75
Solenoid valve 3 way smallStandard 3 way valve for home espresso machines.
2x connection 1/8 F and 1x 7mm hose 220volt
Tip for mounting: connection no. 1 is always on the thermoblock connection.
Replaces valves from:
ODE LBA
OLAB 6000 and 9000…€ 24,95-17%
Water tank Quickmill800, 2000, 3000 and 4000 serie
PL0925RE
156x96x156mm
Not for old model 2820 and 2835€ 29,95 € 24,95
Steampipe QuickMill 800 seriesIf the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…
€ 26,95
Bottom QuickMill 800 serie black€ 27,95-14%
Pump Ulka EX4 230volt€ 34,95 € 29,95
Replacement solenoid valve 3 way QuickMill old typeComplete set to replace the solenoid valve in your old QuickMill, including couplings. The coupling on the pressure hose from the pump is self-flaring. You cut off the old brass ring, the nut of the new coupling goes over the…
€ 32,95
Brew head QuickMill ESE Pods (810, 3012, 3012)For QuickMill ESE: 810, 3010, 3012 and 3014
AL0810GPL€ 59,95
Heating element QuickMill 800/2000/3000 serie220 volt
AL0900SCL
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill…€ 139,95
