Spare parts QuickMill 835

All QuickMill models, ESE and ground coffee M5x10

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

20 cm

O-ring between brass or inox disk and brew head

Foot for Quickmill 800 series

GO0800PF

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

4 foots (16x16mm)

3/8g thread

Clamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.

AC0900CB

Main swicht for espressomachine, for example QuickMill 800 series, La Piccola Cecilia, La Scala, Expobar and many others. 4 fastons

Wiht internal light

Can also be used as a coffee switch. For QuickMill 800 series and many other espresso machines. 4 pins.

Vibiemme, QuickMill and others

Diameter 6,5mm

QuickMill 820, 835, 2820, 2835, 3000, 3002 and 3035

For all QuickMill machines for ground coffee (except machines designed for PODS (filter holder has 2 "lips" instead of normal 3)

Material: Silicone. Suitable for higher…

The ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.

This purifier, is filled with resin granules and works according to ion exchange.

The standard…

Including:

2x O-ring spindle
2x O-ring steam pipeFor series steam pipe with 1 O-ring in the spindle and also for series that have 2 O-rings in the spindle.

The kit is without the valve, in most cases is it not necessary to…

Improved version for the QuickMill ground coffee machine. The holes are much nicer distributed and the surface is even smoother. Another advantage is that the shower is a little less high, so you can dose just a little more. For…

For QuickMill: 820, 835, 2820, 2835, 3000, 3002, 3004, 3035 and EVO series.

OT0900SD

Modern version with flat upperside

M6x1

Total length: 16,6mm

Length thread:11mm

Not for QuickMill 810/820 that is converted from ESE to…

Bracket to attach the steam pipe to the brew head of all new models with Quickmill group.

Height 58mm, could be lower for olders models 800 series.

FE0900SRN

Deep filter basket (25mm) +/- 17 gram.

AC0800FI2M

Broken / worn steam tap, but you never use your steam pipe? With this connection you can replace the complete steam tap.

If you have a 3000 series QM you have to add a new high pressure pipe to the order, the standard pipe will…

QM. 105 degrees, for older models with grey thermoblock.

TE0900C

QM. 110 degrees for modern models

TE0900CR/TE0820CR

22x29x28mm diameter 10mm

For:

ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO

30x39,5x38mm diameter 13,4mm and 10mm

BDV08230AY ODE

Expansion valve / membrane for the pump of the QuickMill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8bsp…

We have developed an improved version of the aluminum versio! This adapter disc is made of INOX and will not show any corrosion and gives a better temperature . The price is also much more interesting compared to the stainless…

Standard 3 way valve for home espresso machines.

2x connection 1/8 F and 1x 7mm hose 220volt

Tip for mounting: connection no. 1 is always on the thermoblock connection.

Replaces valves from:

ODE LBA
OLAB 6000 and 9000…

If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 series, but also fits on the 3000 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not…

For QuickMill 820, 2820, 2835, 3000, 3002, 3035 etc

QuickMill 820, 835, 2820, 2835, 3000, 3002, 3004, 3035 and EVO series

AL0900GPL

220 volt

Used heating element, checked by our technicians.

Mot0835

220 volt