Spare parts Rocket Giotto and Cellini Premium Plus / Evo V1
On this page you will find specific parts of the Rocket Cellini and Giotto Premium Plus and EVO V1. These are the first machine made under the Rocket label. This series are the last wiht a cups frame made of plastic.
The machine is equipped with an E61 group. All parts for the E61 group can be found on this page, the filters on this page and for the filter holder on this page. 
Screw cover ECM/Rocket M3x10€ 0,50
Screw cover ECM/Rocket M3x12€ 0,50
Screw cover ECM/Rocket M3x20€ 0,50
Spring filterholder 58mmFor all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75
Gasket teflon steam pipe - steam tap universalTeflon gasket between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a o-ring available.
16 X 2 MM€ 0,95
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Rubber steampipe 10mm€ 1,00
Gasket closer steamtap UniversalClosing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25
Pump suport Ulka€ 1,25
Pump suport Ulka€ 1,50
O-ring spindle stoomtap Rocket Premium serieSet of O-rings for the spindle of the steam and tea tap of Rocket Giotto and Cellini Premium series (tap with spring that pushes spindle back).
Assemble with heat resistant silicone grease.€ 1,95
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95
Filter suction hoseFilter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.
€ 3,95
Pin tank RocketA639904956
CRONOMETRO R, CRONOMETRO V, GIOTTO CRONOMETRO R, GIOTTO CRONOMETRO V, GIOTTO EVOLUZIONE 2 2017, GIOTTO EVOLUZIONE V2 2013, MOZZAFIATO CRONOMETRO R, MOZZAFIATO CRONOMETRO V, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO…€ 3,95
Pump self-priming bypassUsed in many espresso machines to drain off the air. Self-priming in counter pressure conditions.
Also available in a higher quality brass version.
Assemble with Loxeal or PTFE Tape or with an o-ring.
1/8m x 1/8f€ 4,95
Spout watertapComplete outlet for your tea water tap of many brands of espresso machines,
Connection F 1/8bsp€ 4,95
Spindel steam/water tap ECM / Rocket type 2Spindle steam / water tap for the ECM / Rocket for the newer model steam / water taps (type 2)
Shaft length 55mm (up to circlip notch), universal part. When the notch of the circlip on your machines is worn, you can replace…€ 5,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Empty valve 1/4 low€ 7,95
Handle E61 m8 walnutBeautiful elegant button for the control lever of your E61 brew group and/or for the levers of the lever tap (m8)
We prefer to assemble the knob ourselves with Loxeal, then it fits nicely and the thread (which is tapped into…€ 7,95
Infusion valve complete 53mmUpper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95
Level probe boiler 120mmThe boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95
Collector water tank ECM/Rocket€ 11,95
Handle Walnut M12€ 11,95
Safety valve E61 boiler 3/83/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95
Lever switch 4 poles 15 A4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 13,75
Pressure switch 16 ampère 1/4Thread 1/4.
PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4
Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.
There is also a more solid alternative€ 19,95
Steam pipe universalSteam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
Steam tip 2 x 1.5mm, you can mount all 8.5mm versions on this.
Thread 3/8 bsp, suitable for almost all…€ 19,95
Manometer E61 brew group WhiteUpgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 21,95
Steam pipe universal "Cold touch"Steam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
The steam pipe has a teflon core, so you can no longer burn your fingers!
Steam tip 4x 1.5mm, you can mount…€ 24,50
Manometer E61 brew group BlackUpgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 24,95
Handle steamtap Rocket walnutBeautiful handle for your Rocket's steam or water tap (R58, Appartamento, Mozzafiato and Giotto new model) or other machines with a 7x7 slot on the spindle. With plastic chrome cap in the middle, but the original Rocket caps also…
€ 25,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95
Naked filterholder E61Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…
€ 31,95
Steam tap EvoluzioneFor example for the Giotto and Mozzafiato Evoluzonio machines, but also applicable to other machines as a universal replacement.
This is a universal replacement part with the possibility to mount 7x7 walnut knobs.
Connections to…€ 32,95
Steam tap universal PremiumIncluding for the modern Giotto and Cellini machines, but also for use on other machines as a universal replacement for steam and/or water tap.
Please note that the button has a slightly different model than the original buttons,…€ 32,95
Heating element 1" 1350 watt with gasketThread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 36,50
Water tank ECM / Rocket€ 39,95
Steam/water tap "lever"This allows you to switch your espresso machine from the normal steam/water taps to the so-called push or lever taps. By operating the handles you have instant water or steam. Suitable for mounting on your existing…
€ 49,95
Base kit for water mainsConnect your espresso machine with vibration pump to the water supply without the risk of leaks? We have made a kit that allows you to easily connect the machine to the water supply, but with a solenoid valve between the pump and…
€ 54,95-27%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 65,95
Pressure switch 20 ampere SiraiCE -UL Approv. 3 poles. Male thread G 1/4 for pipe d.4x6 mm, adjust. pressure range 0,5 ÷ 1,4 bar, max breaking capacity: 20A – 400V a.c. (AC1)
P303/T01€ 68,95
