Spare parts Expobar
Spring filterholder 58mmFor all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Blindfilter E61€ 2,95-20%
-20%
Filter 2 cup 14 grams E61€ 4,95 € 3,95
Group thread Expobar€ 4,50
Filterholder gasket E61 8mm€ 4,95
Shower E61€ 4,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Spindle steam tap "compact"Used in Expobar and Izzo and others.
Without o-rings and closing gasekt
65.5 mm M6€ 6,95
Infusion valve complete 53mmUpper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95
Safety valve E61 boiler 1/41/4 bsp (13.16mm)
2,0 bar max, suitalbe for all espressomachines€ 10,95
Safety valve E61 boiler 3/83/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95-21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50
Lever switch 4 poles 15 A4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 12,95
Pump bypass / primer Expobar€ 12,95
Pressure switch 16 ampère 1/4€ 19,95
Steam pipe universal€ 19,95
Steamtap "compact"For Expobar, Izzo and others
Thread to connect on machine: 1/4 bsp
Tread to steam/water pipe 3/8 bsp€ 19,95
-17%
Filterholder double E61€ 29,95 € 24,95-17%
Filterholder single E61€ 29,95 € 24,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95
Relay Expobar Dual Boiler modificationRelays to power an Expobar Dual Boiler machine. Unfortunately, the Expobar dual boiler has a pressure switch that is too weak, which causes overpressure and steam escapes from the overpressure valve. Because the service/brewing…
€ 32,95
Heating element 1" 1350 watt with gasketThread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 34,50
Heating element 1" 1300 watt with gasketThread: 1 1/4" bsp
Length: 100mm
Power: 220 volt 1300 watt€ 37,50
Pressostat 1/4" with relais€ 39,95
Steam/water tap "lever"This allows you to switch your espresso machine from the normal steam / water taps to the so-called lever or push taps.
By operating the levers you immediately have water or steam.
Suitable for Vibiemme Lollo and ECM Profi…€ 44,95
Base kit for water mainsThe most easy way to connect your domestic machine to the mains in a save way. Connect the kit to the vibration pump and connect the wiring to the pump. We support this machine with a 150 cm flexible pipe (3/8). We advise you to…
€ 49,95
Solid state relay 25amp 220/220VACRelay for Expobar and others
Expobar DIAMANT, EXPRESSO, G10, MARKUS, MARKUS SILVER, MEGACREM, MINI COMPACT, MONROC, NEW ELEGANCE, OFFICE
24-280V 90-280VAC€ 52,95-33%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
Shower
Supplement 0,5mm
Filterholder gasket 8mm
Ring 1
Ring 2 3x
Ring 3
O-ring upper pipe (2x types)
Group thread
Rubber lever rod 2x
Lever rod
Springs valves 3x
Spring lever rod
Brew,…€ 89,95 € 59,95
Controlbox boiler level RL30MICRO 8 polesControl box for ECM / Rocket with level probe in the water reservoir. Note, 8 poles. If you have a 9-pole box, you can order a 9-pole box (A101) or connect the ABIL EROG connection to the phase.
Also suitable for:
The machines…€ 74,95
