Spare parts Profitec Pro 300

M4 x 10 Inox

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

QuickMill GO3000PG

Screw to fit the shower of the so-called E61 ring group. In use with the Sanremo Capri and for other models with a Faema-derived groupset. All parts for the E61 ring group can be found on this page.

M5x12

Set of 2

1.78 mm x 6.07 mm

O-ring for the water tank connection of ECM Mechanika/Technika III and IV machines.

9,92X2,62MM OR112

B7496073

+/- 47,3x2,62 mm

O-ring between the group and the shower holder of the so-called E61 ring group. In use with the Sanremo Capri, ECM Botticelli, Casa en Profitec PRO 300 and for other models with a Faema-derived groupset. All…

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

Filter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.

Gasket for the ECM RVS boilers of among others Casa,Technika en Mechanika IV,

Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.

Also available in a higher quality brass version.

Assemble with Loxeal or PTFE Tape or with an o-ring.

1/8m x 1/8f

Shower for the so-called E61 ring group. In use with the Sanremo Capri and for other models with a Faema-derived groupset. All parts for the E61 ring group can be found on this page.

52mm

M4 with manual reset

Silicone group gasket, longer lasting material than the standard gasket.

For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…

M4 thread, manual resettable.

ECM & Rocket C199901550

ECM Heidelberg B7434009

BZ 7434009

The boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…

external ø 58.5 mm - height 7.5 mm - hole ø 6.5 mm
made of brass CW510L (OT57) C529900550

ECM HEIDELBERG: ELEKTRONIKA II PROFI, ELEKTRONIKA PROFI, MECHANIKA, SYNCHRONIKA, TECHNIKA/MECHANIKA IV & V, CLASSICA II/PID, CASA V.

PROFITEC: PRO300, PRO500, PRO600, PRO700, PRO800

P6020.K4

4 poles 15 amp

For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others

ECM HEIDELBERG: ELEKTRONIKA II PROFI, ELEKTRONIKA PROFI, MECHANIKA, SYNCHRONIKA, TECHNIKA/MECHANIKA IV & V, CLASSICA II/PID, CASA V.

PROFITEC: PRO300, PRO500, PRO600, PRO700, PRO800

P6021

IMS is the standard for barista's that participate at competition level. The surface is extremely smooth and the holes are perfectly distributed. An improved water distribution so you get an even better extraction.

You can now…

2x 1/8 bsp F

220/230v

L33,9xH32,8xP43,4mm

Diameter hole 14,2mm

PARKER SOLENOID VALVE COIL 230VAC 50/60Hz ZB09 9W IP65

Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…

Probe ø 6x25 mm - Thread ø 1/4"M bsp

For Bezzera, Izzo/myWay, Rocket, ECM, San Remo, Lelit ea.

A199904679 Rocket
ELETSONTEMPII Vibiemme (VBM)
ELETSONTEMPPI Vibiemme (VBM)

ECM Botticelli and Casa

230volt

VE128IR - drain ø 1/8" conical - max 20 bar
CW617N (OT58)
RUBY seal - orifice ø 1,3 mm
fluid temperature -30°C+140°CTo be used in combination with 9 watt Parker solenoid coils

Base: 32x32mm

Height: 67 mm

For ECM Inox boilers of Casa,Technika en Mechanika IV,

1400 watt 230volt inc gasket

87 mm - 2 poleb
distance between the holes 58 mm
flange ø 54 mm