Spare parts ECM Classika

OR between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a teflon gasket available.

16 X 2 MM

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

This ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

QuickMill GO3000PG

For ECM Technika/Mechanika III

1 piece

7,59 x 2,62

Prevent burnt fingers with this rubber cover for the steam pipe. For steam pipe with an outer diameter of 10 mm, tip for assembly: use a little bit of washing-up liquid so that the cover easily goes over the thickening of the…

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

Closing gasket for adjustable overpressure valve of Bezzera.

8 x 4 mm

BE 5493001

For Bezzera E61 machines up to 30-10-2012

For Bezzera BZseries machines up to 19-03-2013

For Mechanika/Technika 3

8 x 4 mm

Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.

Also available in a higher quality brass version.

Assemble with Loxeal or PTFE Tape or with an o-ring.

1/8m x 1/8f

M4 with manual reset

7633621 BEZZERA

ECM CLASSIKA II - ELEKTRONIKA II PROFI - MECHANIKA

Protector for lever switch,

BZ 7372507

ECM B7372507

Silicone group gasket, longer lasting material than the standard gasket.

For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…

Pipe for manometers. 120cm, extra long so that it better dampens the vibration of the pump. Adaptable to any situation. (additional roll-up or un-roll)

2x 1/8F

M4

Ascaso, Francis Francis and Lelit

4 poles 15 amp

For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others

Mechanika/Technika 3 & Bezzera

overall length 65 mm
square pin 7x7 mmBEZZERA 5960502.02CM

Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.

5530011

Pay…

Bezzera BZ07, BZ09, BZ10, BZ13, BZ16,BZ40, GIULIA, MAGICA, MITICA, STREGA, UNICA

Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…

30 - 120 degrees

Bezzera and ECM

Thread: 1 1/4" bsp
220 volt 1600 wattLengthe: 100 mm

Boiler La Piccola Cecilia

RDL Italia Maxi serie

Vibiemme Domobar Junior HX (Not Dual Boiler)

OPV and non return valve included, for Bezzera and ECM 3rd generation

5965212.01AL