Spare parts Rocket Espresso
Here you will find the spare parts for Rocket Espresso models, including Giotto and Cellini.
Screw cover ECM/Rocket M3x12€ 0,50
Screw cover ECM/Rocket M3x20€ 0,50
Spring filterholder 58mmFor all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75
Gasket closer steam / water tap Vibiemme / FaemaVibiemme Replica, Mercury and Faema E61 steam/water tap
€ 0,95
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Gasket closer steamtap UniversalClosing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25
O-ring spindle steam/water tap Rocket (2 pcs.)ROCKET APPARTAMENTO, CRONOMETRO R, CRONOMETRO V, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO EVOLUZIONE V
€ 1,95
Filter suction hoseFilter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.
€ 3,95
Spindel steam/water tap ECM / Rocket type 2Spindle steam / water tap for the ECM / Rocket for the newer model steam / water taps (type 2)
Shaft length 55mm (up to circlip notch), universal part. When the notch of the circlip on your machines is worn, you can replace…€ 5,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Spout watertap€ 6,95
Empty valve 1/4 low€ 7,95
Handle E61 m8 walnut€ 7,95
Infusion valve complete 53mmUpper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95
Level probe boiler 120mmThe boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95
Safety valve E61 boiler 1/41/4 bsp (13.16mm)
2,0 bar max, suitalbe for all espressomachines€ 10,95
Handle Walnut M12€ 11,95
Safety valve E61 boiler 3/83/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95
Lever switch 4 poles 15 A4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 12,95
Collector water tank ECM/Rocket€ 13,95
Manometer boiler pressure (ECM/Rocket/La Scala)D. 40 mm
For:
ECM/Rocket Cellini / Giotto
La Scala
And others
Rocket nummer: C229900837€ 19,95
Pressure switch 16 ampère 1/4€ 19,95
Steam pipe Rocket R58/R60€ 19,95
Steam pipe universal€ 19,95
Manometer E61 brew groupUpgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011€ 21,95
Water pipe ECM/Rocket type 2€ 21,95
Handle steamtap Rocket walnutBeautiful handle for your Rocket's steam or water tap (R58, Appartamento, Mozzafiato and Giotto new model) or other machines with a 7x7 slot on the spindle. With plastic chrome cap in the middle, but the original Rocket caps also…
€ 23,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95
Steam tap EvoluzioneFor example for the Giotto and Mozzafiato Evoluzonio machines, but also applicable to other machines as a universal replacement.
This is a universal replacement part with the possibility to mount 7x7 walnut knobs.
Connections to…€ 29,95
Steam tap universal Type 2Including for the modern Giotto and Cellini machines, but also for use on other machines as a universal replacement for steam and/or water tap.
Please note that the button has a slightly different model than the original buttons,…€ 29,95
Heating element 1" 1350 watt with gasketThread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 34,50
Pressostat 1/4" with relais€ 39,95
Solid state relay 25amp 220/12VDCRelay Bezzera, Rocket, Pavoni, Izzo and others with 12 volt PID system.
25 amp
Output 220-240V Input 4-32VDC€ 44,95
Steam/water tap "lever"This allows you to switch your espresso machine from the normal steam / water taps to the so-called lever or push taps.
By operating the levers you immediately have water or steam.
Suitable for Vibiemme Lollo and ECM Profi…€ 44,95
Base kit for water mainsThe most easy way to connect your domestic machine to the mains in a save way. Connect the kit to the vibration pump and connect the wiring to the pump. We support this machine with a 150 cm flexible pipe (3/8). We advise you to…
€ 49,95-33%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
Shower
Supplement 0,5mm
Filterholder gasket 8mm
Ring 1
Ring 2 3x
Ring 3
O-ring upper pipe (2x types)
Group thread
Rubber lever rod 2x
Lever rod
Springs valves 3x
Spring lever rod
Brew,…€ 89,95 € 59,95
Water tank ECM / Rocket€ 67,95
Controlbox boiler level RL30MICRO 8 polesControl box for ECM / Rocket with level probe in the water reservoir. Note, 8 poles. If you have a 9-pole box, you can order a 9-pole box (A101) or connect the ABIL EROG connection to the phase.
Also suitable for:
The machines…€ 74,95
Controlbox boiler level RL30MICRO 9 polesF1 = Fase
F2 = Commune
F3 = Resictance / pressure switch
F4 = Solenoid boiler
F5 - pump
F6 = Micro switch group
F7 = ground/frame
F8 = boiler level probe
F9 = Water tank probe /switch€ 99,95
