Spare parts Rocket Giotto and Mozzafiato Evoluzione V2
On this page you will find specific parts of the Rocket Giotto en de Mozzafiato Evoluzione V2. This serie is the successor of the Evoluzione V1 series. The Cellini has been succeeded here by the Mozzafiato and the Giotto has been given a slightly different shape. Both models are equal to each other except for the side covers and of both there is a type V (vibration pump) and type R (rotation pump).
The machine is equipped with an E61 group. All parts for the E61 group can be found on this page, the filters on this page and for the filter holder on this page.
- O-ring cap tap Rocket
This ring secures the chrome cap of the Rocket Evoluzione taps.
2.62 mm x 21.89
APPARTAMENTO, CRONOMETRO R, CRONOMETRO V, GIOTTO EVOLUZIONE 2 2017, GIOTTO EVOLUZIONE V2 2013, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO EVOLUZIONE V, R…€ 0,50 - Spring filterholder 58mm
For all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75 - Gasket teflon steam pipe - steam tap universal
Teflon gasket between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a o-ring available.
16 X 2 MM€ 0,95 - O-ring steampipe universal
This ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95 - Rubber steampipe 10mm€ 1,00
- Gasket closer steamtap Universal
Closing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25 - O-ring spindle steam/water tap Rocket (2 pcs.)
ROCKET APPARTAMENTO, CRONOMETRO R, CRONOMETRO V, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO EVOLUZIONE V
€ 1,50 - Pump suport Ulka€ 1,50
- Silicon pipe 4x7mm 1m (standard)
If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95 - Filter suction hose
Filter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.
€ 3,95 - Pin tank Rocket
A639904956
CRONOMETRO R, CRONOMETRO V, GIOTTO CRONOMETRO R, GIOTTO CRONOMETRO V, GIOTTO EVOLUZIONE 2 2017, GIOTTO EVOLUZIONE V2 2013, MOZZAFIATO CRONOMETRO R, MOZZAFIATO CRONOMETRO V, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO…€ 3,95 - Drain tray Rocket
A439904913
Rocket drain tray 60x60x32 mm
Diameter drain hose 10mm
GIOTTO and MOZZAFiATO EVOLUZIONE, R 60V, R58€ 4,95 - Pump self-priming bypass
Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.
Also available in a higher quality brass version.
Assemble with Loxeal or PTFE Tape or with an o-ring.
1/8m x 1/8f€ 4,95 - Spout watertap€ 4,95
- Group gasket E61 8,5mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 - Thermostat 135 degrees RESETABLE
M4 thread, manual resettable.
ECM & Rocket C199901550
ECM Heidelberg B7434009
BZ 7434009€ 6,95 - Empty valve 1/4 low€ 7,95
- Handle E61 m8 walnut
Beautiful elegant button for the control lever of your E61 brew group and/or for the levers of the lever tap (m8)
We prefer to assemble the knob ourselves with Loxeal, then it fits nicely and the thread (which is tapped into…€ 7,95 - Infusion valve complete 53mm
Upper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95 - Level probe boiler 120mm
The boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95 - Collector water tank ECM/Rocket€ 11,95
- Handle Walnut M12€ 11,95
- Safety valve E61 boiler 3/8
3/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95 - Spindle steamtap Rocket
Spindle for Rocket steam and or watertap. Excluding orings and closing gasket. We advise to use some heat resistant grease for the orings.
ROCKET APPARTAMENTO, CRONOMETRO R, CRONOMETRO V, MOZZAFIATO EVOLUZIONE R, MOZZAFIATO…€ 12,50 - Lever switch 4 poles 15 A
4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 13,75 - Manometer boiler pressure 52mm
Manometer inner diameter 49mm
single scale 0÷3 bar - connection ø 1/8"M
frame ø 57 mm - body ø 52 mmAmong others: Rocket€ 19,95 - Manometer pump pressure 52mm
Manometer inner diameter 49mm
single scale 0÷16 bar - connection ø 1/8"M
frame ø 57 mm - body ø 52 mmAmong others Rocket€ 19,95 - Steam pipe universal
Steam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
Steam tip 2 x 1.5mm, you can mount all 8.5mm versions on this.
Thread 3/8 bsp, suitable for almost all…€ 19,95 - Manometer E61 brew group White
Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 21,95 - Steam pipe universal "Cold touch"
Steam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
The steam pipe has a teflon core, so you can no longer burn your fingers!
Steam tip 4x 1.5mm, you can mount…€ 24,50 - Manometer E61 brew group Black
Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 24,95 - Handle steamtap Rocket walnut
Beautiful handle for your Rocket's steam or water tap (R58, Appartamento, Mozzafiato and Giotto new model) or other machines with a 7x7 slot on the spindle. With plastic chrome cap in the middle, but the original Rocket caps also…
€ 25,95 - Naked filterholder E61
Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…
€ 29,95 -14%
Pump Ulka EX5 230volt€ 34,95 € 29,95- Steam tap Evoluzione
For example for the Giotto and Mozzafiato Evoluzonio machines, but also applicable to other machines as a universal replacement.
This is a universal replacement part with the possibility to mount 7x7 walnut knobs.
Connections to…€ 32,95 - Heating element 1" 1350 watt with gasket
Thread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 36,50 - PID Temp probe 1/4 Inox
Probe ø 6x25 mm - Thread ø 1/4"M bsp
For Bezzera, Izzo/myWay, Rocket, ECM, San Remo, Lelit ea.
A199904679 Rocket
ELETSONTEMPII Vibiemme (VBM)
ELETSONTEMPPI Vibiemme (VBM)€ 36,75 - Water tank ECM / Rocket€ 44,95
- Solid state relay 25amp 220/4-32VDC
25 amp
1 fase 220-240V 94-32VDC
ECM/Profitec P.6031
Rocket A190004666€ 49,95 - Steam/water tap "lever"
This allows you to switch your espresso machine from the normal steam/water taps to the so-called push or lever taps. By operating the handles you have instant water or steam. Suitable for mounting on your existing…
€ 49,95 -27%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 65,95- Walnut set Rocket
Create an even more stunning look for your Rocket with this walnut handle set (for Appartamento, new models Mozzafiato and Giotto, R58, etc).
Consisting of:
- 2 turning knobs for the steam and water taps
- 2 handles for filter…€ 85,95 - Pump professional "Procon 100 lt/h" compact
Compact pump for installation in semi-professional espresso machines.
Yield 100lt/h.
To be mounted on the motor with the supplied clamp, pressure adjustable.
Length from pump 60mm
We call this a Procon pump, because this is…€ 94,95