Spare parts Bezzera BZ99

m5 x 12mm

7816001

Screw BZ M5x14 RVS

7817001

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

Gasket /o-ring between group bell and head for all Bezzera BZ models

3.5 x 33 mm

OR GASKET 13 GASKET 139

7496004

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

QuickMill GO3000PG

With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…

OR112 for Bezzera water tanks

Shower 57mm for Bezzera BZ groups

5285501TP

There is also a higher quality version available made by IMS

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

Y connector for silicone hose. 5mm

Also available in a more solid brass version.

Bezzera 7303033

∙ BZ07
∙ BZ09
∙ BZ10
∙ Galatea Domus
∙ Giulia
∙ Hobby
∙ Unica

Lelit MC532

Closing gasket for adjustable overpressure valve of Bezzera.

8 x 4 mm

BE 5493001

For Bezzera E61 machines up to 30-10-2012

For Bezzera BZseries machines up to 19-03-2013

Oring for heating element Bezzera BZ02, BZ07, BZ10, BZ99

73x3 mm

7496040

Please note this ring is completely symmetrical, it is included in the BZ group of BZ02, BZ35, BZ40 and BZ99.

The BZ domestic machines have a 9.3mm conical ring or 8.1mm O-ring

1186812

It is recommended to order lubricating…

Filter for water tank ECM Mechanika/Technika III and Bezzera

1/4f

7374002

Bezzera Hobby, BZ99 en BZ35

5371801

Diameter 32mm, fitting 6x6

Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.

Also available in a higher quality brass version.

Assemble with Loxeal or PTFE Tape or with an o-ring.

1/8m x 1/8f

The boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…

3/8 bsp (16.66mm)

2,0 bar max, suitalbe for all espressomachines

130 degrees resettable thermostat.

Bezzera: BZ02 - BZ07, BZ09, BZ10, BZ13
Marzocco: FB70, FB80, GB5, GS3, LINEA7634807 BEZZERA
7634813 BEZZERA
7634819 BEZZERA
L276/B MARZOCCO

IMS is the standard for baristas that participate at competition level. You can now also place this shower in your Bezzera! The surface is extremely smooth and the holes are perfectly distributed. An improved water distribution so…

Thread 1/4.

PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4

Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.

There is also a more solid alternative

Bezzera E61 models and ECM Mechanika/Technika III

5225228 and 7826206

2x 1/8 bsp F

220/230v

5285501TP

external ø 57 mm - height 7.5 mm - hole ø 5.5 mm

M12 bold

5978508 BEZZERA
5978508.01 BEZZERA

OPV and non return valve included, for Bezzera and ECM 3rd generation

5965212.01AL

Heating element for Bezzera BZ02, BZ07, BZ10, BZ99

230 volt 1300 watt

100 mm

BEZZERA 5722239