Spare parts Faema E61 brew group
On this page you will find the parts for the original Faema E61 groups. Usable for E61 machines from the 60s, but also for the Legend.
Brass washer valve€ 0,45
1mm GASKET SUPPLEMENT€ 0,60
Hexagon bolt E61 group€ 0,65
O-ring upper pipe FAEMA E61For original Feama group ((E61 and Legend), Wega and Futurmat. For modern E61 group you need this o-ring https://www.drtradingshop.nl/en_GB/a-50762353/spare-parts-e61-brew-group/o-ring-upper-pipe-modern-e61/#description
18,65 x…€ 0,75
Valve gasket E61€ 0,75
Discharge valve E61€ 1,00
Lubricant for filter holder (Portion)With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50
Valve guide 12mm€ 1,50
Valve guide FAEMA 6,5mm€ 1,50
Brew valve guide€ 1,75
Grease high temperature (Portion)Serving to lubricate the rubber of the control of eg. your E61 lever rod. Enough for one-time use, high quality heat resistant and food safe. Also ideal for lubricating different types of steam valves and knee joints of steam…
€ 1,75
Infusion valve guide 34mm€ 1,75
Rubber lever rod (set of 2)€ 1,75
Valve guide 11mm€ 1,75
Injector€ 1,95
Valve body€ 1,95
Chromer mushroom cap€ 2,25
Jet E61 Brew head 3,5mm TeflonPlace this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 9.6mm / 14mm€ 2,50
Jet E61 Brew head 4mmPlace this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 10mm / 12mm€ 2,50
Lever rod guide€ 2,95
Group thread E61€ 3,45
Command handle E61 m10€ 3,75
Drain valve fitting€ 4,95
Filterholder gasket E61 9mm€ 4,95- Filterholder gasket E61 10mm€ 4,95
Filterholder gasket E61 8mm€ 4,95
Shower E61€ 4,95
Lower valve complete FAEMADrain valve for the original Faema E61 groups, not for modern groups.
€ 5,95
Filterholder gasket E61 8mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95- Group gasket E61 8,5mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 - Group gasket E61 9mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 
Infusion valve Faema E61Upper guide: 12mm
lower guide: 34mm
total length 59,5mm
For original E61 FAEMA and some other old groups.€ 6,95
Handle E61 m10 walnut€ 7,95
Lever handle E61€ 7,95
Lever Rod Faema E61Suitable for original Faema E61 brew group, for modern groups we recommend you to purchase the modern lever rod.
€ 7,95-21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50
Shower E61 IMS 200IM competition styleIMS is the standard for baristas that participate at competition level. You can now also place this shower in your E61 brew group. The surface is extremely smooth and the holes are perfectly distributed. An improved water…
€ 14,95
Lever collector E61€ 19,50-18%
Overhaul kit E61 brew group (gaskets)Kit for complete overhaul E61 brew group:
∙ Shower
∙ Supplement 0,5mm
∙ Filterholder gasket 8mm
∙ Valve gasket 3x
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ Ring 4
∙ Group thread
∙ Rubber lever rod 2x€ 24,95 € 20,50
Group collector€ 20,95
Manometer E61 brew groupUpgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011€ 21,95-38%
Overhaul kit FAEMA E61 brew group (complete)Kit for complete overhaul E61 brew group:
Shower
Supplement 0,5mm
Filterholder gasket 8mm
Ring 1
Ring 2 3x
Ring 3
Ring 4
Group thread
Rubber lever rod 2x
Springs valves 3x
Spring lever rod
Cap lever rod
Upper, middle and lower…€ 79,95 € 49,95
Brewing Pressure Profiling Control E61 brew group"Brewing Pressure Profiling Control "(BPPC) is the latest innovation for the E61 brew group. With this upgrade you can easily adjust the extraction pressure while brewing the espresso. BPPC ensures that you can achieve an even…
€ 169,95
