Spare parts Vibiemme E61 brew group
On this page you will find the parts of the manual E61 group from Vibiemme, as used in the models of the Domobar series and the manual Replica models. The group and parts are largely the same as the modern E61 group, but there are some deviating parts. The parts below are specific to Vibiemme.
Brass washer valve€ 0,45
Hexagon bolt E61 group€ 0,65
1mm GASKET SUPPLEMENT€ 0,75
Valve gasket E61€ 0,75
Lubricant for filter holder (Portion)With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50
Valve guide 12mm€ 1,50
Brew valve guide€ 1,75
Rubber lever rod (set of 2)€ 1,75
- Valve guide 11mm€ 1,75
Injector 0,6mm€ 1,95- Injector 0,8mm€ 1,95
Valve body€ 1,95
Jet E61 Brew head 3,5mm TeflonPlace this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 9.6mm / 14mm€ 2,00
Chromer mushroom cap€ 2,25
Jet E61 Brew head 4mmPlace this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 10mm / 12mm€ 2,50
Upper pipe gasket Vibiemme€ 2,95
Command handle E61 m8€ 3,75
Grease high temperature 6 gramServing to lubricate the rubber of the control of eg. your E61 lever rod. Enough for one-time use, high quality heat resistant and food safe. Also ideal for lubricating different types of steam valves and knee joints of steam…
€ 3,85
Group thread E61€ 3,95
Filterholder gasket E61 8mm€ 4,95
Shower E61€ 4,95
Filterholder gasket E61 8mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Handle E61 m8 walnutBeautiful elegant button for the control lever of your E61 brew group and/or for the levers of the lever tap (m8)
€ 7,95
Infusion valve complete Vibiemme 61mmUpper guide: 13mm
Large guide: 35mm
total length 61mm
Suits VBM E61 brew heads€ 10,95-21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50
Lever rod (original) Vibiemme€ 14,95
Shower E61 IMS 200IM competition styleIMS is the standard for baristas that participate at competition level. You can now also place this shower in your E61 brew group. The surface is extremely smooth and the holes are perfectly distributed. An improved water…
€ 15,95
Group brass lever rod Vibiemme€ 18,25
Upper pipe Vibiemme€ 23,95
Shower IMS E61 MatrixThe MATRIX® shower is made of 316L s.steel plate, composed of 50 layers of micro pheres, creating tens of thousand of routes, as narrow as 4-5 microns. This allows a homogeneous distribution of the water on the coffee disk. The…
€ 32,95-28%
Overhaul kit E61 brew group VIBIEMME (complete)Kit for complete overhaul Vibiemme E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Filterholder gasket 8mm or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙…€ 94,95 € 67,95
