Spare parts Rocket Boxer
On this page you will find specific parts of the Rocket Boxer, a professional machine made by Rocket.
The machine is equipped with an E61 ring group. All parts for the E61 ring group can be found on this page, the filters on this page and for the filter holder on this page.
Gasket teflon steam pipe - steam tap universalTeflon gasket between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a o-ring available.
16 X 2 MM€ 0,95
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Shower screw E61 ring groupScrew to fit the shower of the so-called E61 ring group. In use with the Sanremo Capri and for other models with a Faema-derived groupset. All parts for the E61 ring group can be found on this page.
M5x12€ 0,95
Gasket closer steamtap UniversalClosing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25
O-ring shower holder E61 ring group+/- 47,3x2,62 mm
O-ring between the group and the shower holder of the so-called E61 ring group. In use with the Sanremo Capri, ECM Botticelli, Casa en Profitec PRO 300 and for other models with a Faema-derived groupset. All…€ 2,00
Shower E61 ring groupShower for the so-called E61 ring group. In use with the Sanremo Capri and for other models with a Faema-derived groupset. All parts for the E61 ring group can be found on this page.
52mm€ 4,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Level sensor boiler 180mmThe boiler probe is an essential component of a water heater exchanger. If it is damaged, there is a risk that the heating element will run dry. The probe must also be removed and cleaned during major maintenance; descaling alone…
€ 10,95
Shower holder E61 ring groupexternal ø 58.5 mm - height 7.5 mm - hole ø 6.5 mm
made of brass CW510L (OT57) C529900550€ 10,95
Shower E61 ring group CI 200 IM competition styleIMS is the standard for barista's that participate at competition level. The surface is extremely smooth and the holes are perfectly distributed. An improved water distribution so you get an even better extraction.
You can now…€ 16,50
Steamtap universalUsed in many professional espresso machines and semi-professional machines.
€ 22,50
Solenoid Parker Valve ZB09 9WL33,9xH32,8xP43,4mm
Diameter hole 14,2mm
PARKER SOLENOID VALVE COIL 230VAC 50/60Hz ZB09 9W IP65€ 27,50
PID Temp probe 1/4" InoxProbe ø 6x25 mm - Thread ø 1/4"M bsp
For Bezzera, Izzo/myWay, Rocket, ECM, San Remo, Lelit ea.
A199904679 Rocket
ELETSONTEMPII Vibiemme (VBM)
ELETSONTEMPPI Vibiemme (VBM)€ 36,75
Valve 3 way base ParkerVE128IR - drain ø 1/8" conical - max 20 bar
CW617N (OT58)
RUBY seal - orifice ø 1,3 mm
fluid temperature -30°C+140°CTo be used in combination with 9 watt Parker solenoid coils
Base: 32x32mm
Height: 67 mm€ 39,95
Heating element Vibiemme 2 groupVBM Mercury and Replica 2 group (not for compact versionss/Minimax).
3500watt 230volt, can be used instead of 2700w
Length 340mm
Without gasket€ 56,95
Solenoid valve Parker 2 way21FH1025 - max 20 bar
FKM seal - orifice ø 2.5 mm
with coil 483510S6 XS03S6 9W 220/240 50/60Hz
fluid temperature -40°C+140°C€ 62,95
Pressure switch 30 ampère SiraiCE-SEV-ASE-UL approved
3 poles 30A
Connection 1/4"M bsp
adjustable scale 0.5÷1.4 bar
fixed differential 0.15 (± 0.06) bar
fluid temperature max :140°C
max contact load : 220V 7KW (30A)
400V 12KW (30A)Sirai P302/6 TRI 30A€ 74,95
Walnut set RocketCreate an even more stunning look for your Rocket with this walnut handle set (for Appartamento, new models Mozzafiato and Giotto, R58, etc).
Consisting of:
- 2 turning knobs for the steam and water taps
- 2 handles for filter…€ 85,95-10%
Pump professional type "Rotary vane 200 lt/h"The pump head for professional machines. The maximum volume is 200lt / h Pressure and the pressure is adjustable. The pump comes with a mounting clamp.
We call this a Procon pump because it is the best known brand. However, this…€ 99,95 € 89,95
Motor pump RPM standard 150 watt150 Watt on mounting plate, for professional machines with internal pump. Or for semi professional machines to place outside the machine.
Sizes including compact pump head:
24 cm x 12,5 cm
Height including condenser: 15…€ 154,95
