Spare parts QuickMill 5000
On this page you can find parts for the QuickMill 5000 (fully automatic).
Screw spout Quick Mill 5000Stainless steel bolt to secure the spout to the brewing pot of the Quick Mill 5000 series. We replace the Quick Mill Phillips screw for this Allen key because you can easily tighten and loosen it with an Allen key with a 3mm ball…
€ 0,75
Sleeve pressure pipe Quick MillSleeve to secure the pressure hose in the pump diaphragm of Quick Mill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the Quick Mill's with an old model solenoid valve and also with…
€ 0,75
Spring grinding knob Quick Mill 5000Small spring in the knob for setting your grind size on the Quick Mill 5000; this ensures that the knob stays in place.
€ 0,75
90° pump bendAngled coupling for an Ulka pump or output of a solenoid valve or OPV.
Lelit MC017
Quick Mill GO3000PG€ 0,95
O-ring for drainage valve Quick Mill 5000O-ring for the drainage valve of the Quick Mill 5000 series. Replace this if the drainage valve leaks from the valve housing.
€ 0,95
O-ring spout brew group Quick Mill 5000O-ring for sealing the spout in the brewing pot of the Quick Mill 5000 series.
€ 0,95
Seegering upper piston shaft Quick Mill 5000Clamp to secure the upper piston shaft of the Quick Mill 5000 series. 2x included in the machine, price per piece.
SPAE7€ 0,95
Button oval 17x13mmFor La Piccola Sara, Vibiemme Replica, Bezzera BZ, ECM Botticelli and others
For other parts of the switch see this page.€ 1,20
Pump suport Ulka€ 1,50
Support switch ovalIncluding for La Piccola Sara, Vibiemme Replica, Bezzara, Quick Mill and ECM Botticelli
For push button oval 17x13mm
Mounting hole: 21x17 mm
Lelit MC131€ 1,50
Ring for upper piston shaft springs Quick Mill 5000Rings to fix the springs around the shaft of the upper piston of the Quick Mill 5000 series. 2x included in the set.
RO0825SR€ 2,45
Filter sunction hosePrevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8
Quick Mill PL0950FI
Lelit MC042€ 2,75
Bushing for upper piston Quick Mill 5000Bushing for the top piston of the Quick Mill 5000 series. This bushing holds the pressure hose in place.
OT05000BO€ 2,95
Closing sheet Quick Mill 5000 hopperShut-off valve for the bean hopper of the Quick Mill 5000 series
PL05000LC€ 2,95
Door switch tab Quick Mill 5000Tab for the switch on the door of the Quick Mill 5000 series
AC0148LMP€ 2,95
Dosing wheen DosamaticPL05000MP
Rotary knob for dosing the grind or the amount of water of the Quick Model 835, 3002, 3012 and 5000€ 2,95
O-rings pressure hose upper piston (set of 2)Set of O-rings for closing the pressure hose in the upper piston of the QuickMill 5000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the head)
OR103V 2x€ 2,95
Pin door hinge Quick Mill 5000Pin for the hinge of the door of the Quick Mill 5000 series
AC05000SP€ 2,95
-50%
Shower Quick Mill 5000 (old model)AC05000DO
Note: only for very old machines with small brewing pot +/-2000
Shower diameter 30.5mm
2x included in the machine€ 5,95 € 2,95
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95
Filter suction hoseFilter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.
€ 3,25
Safety thermostat 117°C.Includes 2 sockets for mounting the thermostat to the wiring. For the group of the Quick Mill 5000.
€ 3,95- Safety thermostat 167°C.
Includes 2 sockets (D101) for mounting the thermostat to the wiring.
FU0800
We also have any new insulation available.€ 3,95 
Switch 4 polesUniversal switch, used by many brands and models, including Ascaso Steel, La Piccola Sara, ECM, Vibiemme, Isomac, Quick Mill etc.
Suitable for both round and oval supports. We recommend replacing the support if you swap the…€ 3,95
Grinding knb Quick Mill 5000PL05000PV
Without spring for clamping, this can be ordered separately.€ 4,95
- O-ring pistons Quick Mill 5000 (old model)
OR4125 (no. 49)
31.34 x 3.53
This ring fits around both the upper and lower pistons of the automatic Quick Mill brewing unit (5000 series).
Only suitable for first-generation machines +/-2000; these have a smaller brewing pot…€ 4,95 
- Switch 4 poles (Push)
Suitable for both round and oval supports.
On the QM XX35, this switch is used to control the coffee grinder.
With the QuickMill 5000, this switch is for 1 and 2 cups of coffee and hot water.
This Push (or momentary switch)…€ 4,95 
Water reservoir lid Quick Mill 5000Lid for the water reservoir of the Quick Mill 5000 series, so that no coffee can fall into the clean water.
PL05000CV€ 5,95
Overhaul kit steam pipe Quick MillIncluding:
2x o-ring spindle
2x o-ring steam pipeFor series steam pipe with 1 o-ring in the spindle and also for series that have 2 o-rings in the spindle.
The kit is without the valve, in most cases is it not necessary to…€ 6,75
Switch 2 poles (Push)For the old 3000 series (brushed stainless steel) for activating the grinder (3035) or for activating the pump (3002 Dosamatic)
With the Quick Mill 5000, this switch is for 1 and 2 cups of coffee and hot water.
This Push (or…€ 7,95- Switch 4 poles (on/off)
Older 3000 series On/off, steam or coffee.
QuickMill 5000 On/off or steam
Quickmill IN05000
Mounting hole 35x12mm€ 7,95 no image available
Drukslang Quick Mill 5009Pressure hose from the thermoblock to the brew group of the 5009
Incl. wartel
TU05009EC€ 9,95
Fuse/holder plug holderFor QM 2820, 2835, 3000 and 5000 series.
Please note that older QuickMill machines have a safety holder that is secured with screws, but unfortunately we no longer have this.
CON/CI10
For Euro cuttings and 2 fuses…€ 9,95
Thermostat Quick Mill 120°C.Coffee thermostat original Quick Mill. 120°C. Please note this is not a standard thermostat, but extra high so that the temperature is higher. This can come in handy if you like a very hot espresso, or if you want to make a…
€ 12,95
Knob Quick Mill dosingKnon for the timer of the Quick Mill 3000 series. For the 3002 and 3012 dosamatic as well as the 2835, 3035 and 835 Retro. Includes screw to secure the knob.
PL03035MR€ 15,50
Door Quick Mill 5000Door for the Quick Mill 5000 black. The same door is used for the stainless steel version, only the stainless steel casing needs to be transferred and glued onto the new door.
PL05000PO-NE€ 19,95
Pulsor pump (Quick Mill)Expansion valve / membrane for the pump of the Quick Mill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8"bsp…
€ 19,95
Solenoid valve 3-way smallStandard 3-way valve for home espresso machines.
2x connection 1/8 F and 1x 7mm hose 220volt
Tip for mounting: connection no. 1 is always on the thermoblock connection.
Replaces valves from:
ODE LBA
OLAB 6000 and 9000…€ 24,95
-3%
DB924 Caffè beans 1kgSpecially blended coffee in honor of Dante Belardinelli, the most famous roaster in Florence. In his hometown called "il re del caffe" ("the coffee king"). Unlike the Jolly Caffè Crema and Illy Caffé, DB's has a percentage of…
€ 29,95 € 28,95-5%
Overhaul kit group Quick Mill 5000Complete set to maintain the group of your Quick Mill La Messoni 5000.
Contents:
- 1x Allen screw for spout (to replace cross head)
- 1x o-ring for spout
- 1x shower top piston screw
- 1x shower lower piston screw
- 1x cotter…€ 31,10 € 29,50-14%
Pump Ulka EX5 230 Volt€ 34,95 € 29,95
Manometer Quick Mill 40mm 0-16 barManometer Quick Mill 5000, but also Quick Mill Carola and Silvano.
MAN05000N€ 34,95
Group Quick Mill 5000Group including heating for Quick Mill 5000 series
Diameter 41mm
AL07000CC€ 114,95
-10%
DB924 Caffè beans Carton 6 kg.€ 179,70 € 161,73
PCB Quick Mill 5000Printed circuit board for the Quick Mill 5000 series
SCH06000
We advise against installing this board yourself, but recommend having us do it to configure it correctly.€ 169,95
