Spare parts QuickMill diverse

All Quick Mill models, ESE and ground coffee M5x10

VIB93

Quick Mill M5x8

VIB193

All Quick Mill models, both ESE and ground coffee M4x8 stainless steel to fix the brew head to the housing.

VII26

Screw for fixing the lid/heating plate of the Quick Mill 3000 series.

2,9 x 13 mm RVS

VII23

All models Quick Mill mill, for securing the grinding blades

VI40

Sleeve to secure the pressure hose in the pump diaphragm of Quick Mill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the Quick Mill's with an old model solenoid valve and also with…

Clamp which you slide over the housing and through which the screw of the lid/heating plate of the Quick Mill 3000 series passes.

MO0825CS

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

Quick Mill GO3000PG

For 810 and 820 M4x18

II196

VIB119

M5x20

20 cm

PLGEGIALLO

1/8" BSP

OT07000RP

O-ring between brass or inox disk and brew head.

OR3024-BS

Foot for Quick Mill 800 series

GO0800PF

Spring for the Quik Mill espresso machines for ground coffee

Length 18mm

MO0900GE

Spring for the Quik Mill espresso machines for ESE servings

Length 15mm

MO0810VNR

Waterstop for all Quick Mill models. The water stop ensures that no coffee can flow back into the thermoblock, so it is important that this part is present in your machine.

SPCHI2X9

Prevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8

Quick Mill PL0950FI

Lelit MC042

40x30mm

TA05000A

GO03000VA EPDM

Set of o-rings for sealing the pressure hose in the brew group for the Quick Mill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)

OR103V 2x

Also for the pressure…

OT0835ES

MO0800ES

With this handle you can turn the steam pipe in and out without burning your fingers!

Filter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.

2x OR106

3/8" (16,66mm), Length 29mm

PL0900MV

Includes 2 sockets (D101) for mounting the thermostat to the wiring.

FU0800

We also have any new insulation available.

Rubber that goes around the edge of the bean container hole in the lid/warming plate of the Quick Mill 2835 and 3035 series.

GO03035PT

3/8g thread

Clamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.

AC0900CB

220/230v

SE0825A

SE03000

For the older versions of the 800 and 3000 series with a larger bulb (hole diameter 10mm)

SE05000V

SE05000

For ESE Servings (Pads/ Servings/ Cialde)

Quick Mill 810, 3004 and 3012
Ascaso Dream ESE
OR147V +/- 43 x 3,5 mm

QuickMill 820, 835, 2820, 2835, 3000, 3002 and 3035

For all Quick Mill machines for ground coffee (except machines designed for PODS (filter holder has 2 "lips" instead of normal 3)

Material: Viton. Suitable for higher…

The ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.

This purifier, is filled with resin granules and works according to ion exchange.

The standard…

AC0810DO

For Quic kMill 810, 3010, 3012 and 3014

For all Quick Mill machines for ground coffee (including 'converted' machines)

AC0900DO

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill…

OT0520SL

Set of 4 suitable for almost all espresso machines. We recommend attaching them with super glue or super glue for optimal attachment.

d.22mm
h.10mmQuick Mill GO03000PFN

Including:

2x o-ring spindle
2x o-ring steam pipeFor series steam pipe with 1 o-ring in the spindle and also for series that have 2 o-rings in the spindle.

The kit is without the valve, in most cases is it not necessary to…

With coffee cup print, 6 pin connection, also usable for 4 pin situations. For example for Quick Mill, La Piccola and many others,

Quick Mill code: IN0810PC

For all Quick Mill ground coffee machines (except converted machines with a filterholder with 2 "lips") A stainless steel variant is also available

AL0900DDF

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill…

AC0500FI1

Especially for Quick Mill 810 machines which are transformed for the use of Pods to ground coffee.

810, 2810, 3010, 3012 and 3014

AC0500FI2

Especially for Quick Mill 810 machines which are transformed for the use of Pods to ground coffee.

810, 2810, 3010, 3012 and 3014

IN0810PA

Mounting hole 22x30 mm

Especially for Quick Mill 810 machines which are transformed for the use of Pods to ground coffee.

Quick Mill 810, 2810, 3010, 3012 and 3014

71,50 x 55 x 4

GO500GS

Improved version for the Quick Mill ground coffee machine. The holes are much nicer distributed and the surface is even smoother. Another advantage is that the shower is a little less high, so you can dose just a little more. For…

IN0810PV

Hose between brew group and steam tap 800, 2800 and 3000 series.

Note: do not forget to order the 2 o-rings, these must be replaced in the brew groep!

L 140mm

TU0820RSR / TU03035RSDE

AL0810DDF

Especially for QM810 machines which are transformed for the use of Pods to ground coffee.

Quick Mill: 810, 2810, 3010, 3012 and 3014

OT0900SD

Modern version with flat upperside

M6x1

Total length: 16,6mm

Length thread:11mm

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick…

Bracket to attach the steam pipe to the brew head of all new models with Quick Mill group.

Height 58mm, could be lower for olders models 800 series.

FE0900SRN

Rubber sealing that goes around the edge of the Quick Mill 3000 series lid/hot plate. Length is for a 3035, but also suitable for the 3000/3002/3004

GO03035CS

Quick Mill ground coffee

Depth 23mm

AC0800FI2

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

AC0800FI1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

OT0810VD

810, 3010, 3012 and 3014.

Especially for Quick Mill 810/3010 machines which are transformed for the use of Pods to ground coffee.

Length total: 22mm

Length thread: 14mm

OT0810SD

Quick Mill ground coffee

Depth 25mm

AC0800FI2M

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

#1 Standard (Espresso small)
#2 (Espresso large)
For modern Quick Mill filterholder, when you have an older filterholder you can use the filters for La Piccola.

This filter ensures that you can also use ESE servings in your Quick Mill for ground coffee, the shape is better for ESE than the standard 1-cup filter basket for ground coffee. Just a little easier sometimes, but the result is…

Defective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…

Quick Mill. 105°C., for older models with grey thermoblock.

TE0900C

Quick Mill. 110°C., for modern models (>-`04)

TE0900CR/TE0820CR

Coffee thermostat original Quick Mill. 120°C. Please note this is not a standard thermostat, but extra high so that the temperature is higher. This can come in handy if you like a very hot espresso, or if you want to make a…

Quick Mill 135°C.

TE0900V

Knon for the timer of the Quick Mill 3000 series. For the 3002 and 3012 dosamatic as well as the 2835, 3035 and 835 Retro. Includes screw to secure the knob.

PL03035MR

22x29x28mm diameter 10mm

5VA/5W 230V

For:

ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO

Flowmeter for Quick Mill model: 3002, 3012, Ev0 modellen 3130, 3135, 3230, 3245

Ascaso model: Dream PID and Steel PID (Artikelnummer Flowmeter Ascaso: V4183)

Podmeter for the QM3000 series. For both the 3002 and 3012 dosamatic and the 0835/2835/3035 mill dosing. With wiring and plug so that it can be plugged into the printed circuit board.

PCPOT / PC3002

Expansion valve / membrane for the pump of the Quick Mill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8"bsp…

Pulse switch for the QM3000 series. For both the 3002 and 3012 dosamatic coffee activation and the 3035 grinder activation. Also for the 835 Retro .

IN0970P

30x39,5x38mm diameter 13,4mm and 10mm

BDV08230AY ODE

A nice upgrade for the Quick Mill 3000 series (3000, 3002 and 3035 with pressure gauge, no addition for ESE machines)

By mounting this OPV (overpressure valve) you can adjust the pump pressure to a maximum of 9 bar, otherwise the…

OT0810AP

We have developed an improved version of the aluminum versio! This adapter disc is made of INOX and will not show any corrosion and gives a better temperature . The price is also much more interesting compared to the stainless…

AC01000AP
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso (3035)
-…

3k3

Hole M4

Quick Mill, SanRemo etc

Standard 3-way valve for home espresso machines.

2x connection 1/8 F and 1x 7mm hose 220volt

Tip for mounting: connection no. 1 is always on the thermoblock connection.

Replaces valves from:

ODE LBA
OLAB 6000 and 9000…

If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 3000 series. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…

If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…

43x26x7mm 3 holes RH

FE023MA

Quick Mill 2835/3035/0835/060/031

MAN3035

RE0810

OT0500PFC

OT0810PFC

For Quick Mill 810, 3010, 3012 and 3014

For Quick Mill ESE: 810, 3010, 3012 and 3014

AL0810GPL

Brass filter holder for Quick Mill group with single spout

OT0800PFC1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

Brass filter holder for Quick Mill group with double spout

OT0800PFC

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

OT0810RLN

Quick Mill 800 and 2000 series

Version of the EVO70 series with stainless steel pipe and 1 hole steam tip. The pipe is double-walled so that it does not get so hot and the milk does not burn the pipe.

This upgrade can be mounted in your 2800 or 3000 series…

Conversion kit for the Quick Mill 810, 3010, 3012 and 3014 to adapted from ESE servings to ground coffee usage (2 ears filterholder). Not suitable for standard Quick Mill machines for ground coffee!

Including:

∙ Disk Quick…

AL0900GPL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

OT03000RL

Complete circuit board for the Quick Mill with built-in grinder.

From 2020, a new type of printed circuit board will be delivered that is also used in the Evo series, it is interchangeable. For the older 835 with a button for 1…

230 Volt

AL0900SCL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill…