Spare parts ECM Milano Giotto and Cellini
On this page you will find specific parts of the ECM Milano Giotto and Cellini, built untill 2008 by ECM in Milano. The machine is equipped with an E61 group. All parts for the E61 group can be found on this page, the filters on this page and for the filter holder on this page.
There are 3 different series of Giotto and Cellini, as shown on below:
Screw cover ECM/Rocket M3x10€ 0,50
Screw cover ECM/Rocket M3x12€ 0,50
Screw cover ECM/Rocket M3x20€ 0,50
Teflon gasket steampipe 1/8€ 0,50
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Pump bendAngled coupling for an Ulka pump or output of a solenoid valve or OPV.
Lelit MC017
Quick Mill GO3000PG€ 0,95
Gasket closer steamtap UniversalClosing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25
Pump suport Ulka€ 1,25
Pump suport Ulka€ 1,50
Filter sunction hosePrevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8
Quick Mill PL0950FI
Lelit MC042€ 2,75
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95
Filter suction hoseFilter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.
€ 3,25
Ulka thermical fuse€ 3,95
Pump self-priming bypassUsed in many espresso machines to drain off the air. Self-priming in counter pressure conditions.
Also available in a higher quality brass version.
Assemble with Loxeal or PTFE Tape or with an o-ring.
1/8m x 1/8f€ 4,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Thermostat 135°C. RESETTABLEM4 thread, manual resettable.
ECM & Rocket C199901550
ECM Heidelberg B7434009
BZ 7434009€ 6,95
Empty valve 1/4 low€ 7,95
Knob steam tap ECM/Isomac ClassicKnob for the older (ECM Milano) ECM Giotto, Cellini and Isomac models. Older types of which the steam and tea pipe can only be moved upward or downward.
Connection 6x6mm, diameter 50mm.€ 8,00
Non-retour valve 1/8 M x 1/8 MThis valve prevents water from flowing back from, for example, the boiler or heat exchanger.
Non-return valve for use in an HX machine.
Connection: 2 x 1/8" BSP male
Length: 47.5mm including thread, 33mm without€ 8,95
Spindle steam tap ECM ClassicSteam Tap Shaft/spindle Brass - Teflon Seal - 76x10 mm - 6x6mm M6 TAP - ECM / ISOMAC / ROCKET
Both tea and steam tap
ISOMAC TEA
ROCKET GIOTTO CLASSIC
ECM MILANO GIOTTO/CELLINI
C529901595
Can be used as an alternative to the…€ 9,75
Level probe boiler 120mmThe boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95
Safety valve E61 boiler 3/83/8 bsp (16.66mm)
2,0 bar max, suitalbe for all espressomachines€ 11,95
Lever switch 4 poles 15 A4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 13,75
Manometer boiler pressure (ECM/Rocket/La Scala)D. 40 mm
For:
ECM/Rocket Cellini / Giotto
La Scala
And others
Rocket nummer: C229900837€ 19,95
Pressure switch 16 ampère 1/4"Thread 1/4".
PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4
Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.
There is also a more solid alternative€ 19,95
Steam pipe universalSteam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
Steam tip 2 x 1.5mm, you can mount all 8.5mm versions on this.
Thread 3/8 bsp, suitable for almost all…€ 19,95
Steam tap ECM Classic/ IsomacFor Isomac machines and first series Giotto and Cellini.
C199900090€ 24,95-14%
Pump Ulka EX5 230 Volt€ 34,95 € 29,95
Naked filterholder E61Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…
€ 31,95
Water tank Isomac/ECM/Pavoni/Quick MillStandard reservoir for many types of espresso machines. Version with handle in the middle of the tank to make it easier to remove.
- La Pavoni Caffè Espresso
- La Pavoni Gran Caffè
- Isomac Venus
- Isomac Giada
-Isomac…€ 32,50
Steam tap EvoluzioneFor example for the Giotto and Mozzafiato Evoluzonio machines, but also applicable to other machines as a universal replacement.
This is a universal replacement part with the possibility to mount 7x7 walnut knobs.
Connections to…€ 32,95
Steam tap universal PremiumIncluding for the modern Giotto and Cellini machines, but also for use on other machines as a universal replacement for steam and/or water tap.
Please note that the button has a slightly different model than the original buttons,…€ 32,95
Heating element 1" 1350 watt with gasketThread:1" bsp (+/- 33,3 mm)
Length: 125 mm
220 volt 1350 watt
Heating element for many brands:
ECM and Rocket (not for ECM Mechanica 3, this model has a metric thread (32mm)
Isomac HX machines
Vibiemme Domobar…€ 36,50
Water tank ECM / Rocket€ 39,95-26%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 66,95
Control box boiler level RL30/2S/3ROur most widely applicable control box, this 10-pin box is for machines with detection of the water level in the reservoir. When used to replace a 9-pin box, you can leave the LAMP connection out of use, and with an 8-pin box,…
€ 89,95
Controlbox boiler level RL30MICRO 8 polesControl box for ECM / Rocket with level probe in the water reservoir. Note, 8 poles. If you have a 9-pole box, you can order a 9-pole box or 10-pole box.
Also suitable for:
The machines from Gruppo Izzo. ViVi and Alex Duetto…€ 109,95
Controlbox boiler level RL30MICRO 9 polesF1 = Fase
F2 = Commune
F3 = Resictance / pressure switch
F4 = Solenoid boiler
F5 - pump
F6 = Micro switch group
F7 = ground/frame
F8 = boiler level probe
F9 = Water tank probe /switch
For ECM Milano, Rocket and Isomac E61€ 109,95
