Spare parts QuickMill 2835

All Quick Mill models, ESE and ground coffee M5x10

VIB93

Quick Mill M5x8

VIB193

All Quick Mill models, both ESE and ground coffee M4x8 stainless steel to fix the brew head to the housing.

VII26

All models Quick Mill mill, for securing the grinding blades

VI40

Sleeve to secure the pressure hose in the pump diaphragm of Quick Mill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the Quick Mill's with an old model solenoid valve and also with…

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

Quick Mill GO3000PG

VIB119

M5x20

20 cm

PLGEVERDE

Orange lens for indicator light for Quick Mill, Vibiemme and other espresso machines

PLGEGIALLO

Orange lens for indicator light for Quick Mill, Vibiemme and other espresso machines

1/8" BSP

OT07000RP

O-ring between brass or inox disk and brew head.

OR3024-BS

Spring for the Quik Mill espresso machines for ground coffee

Length 18mm

MO0900GE

For Ascaso Steel and Barista, QuickMill 2800 series, but also for Ascaso I-serie and Demoka grinders.

Waterstop for all Quick Mill models. The water stop ensures that no coffee can flow back into the thermoblock, so it is important that this part is present in your machine.

SPCHI2X9

Prevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8

Quick Mill PL0950FI

Lelit MC042

GO03000VA EPDM

For: Ascaso Steel and Barista, QuickMill 2800 series, Ascaso I-serie and Demoka.

PL02835TOL

12mm

Set of o-rings for sealing the pressure hose in the brew group for the Quick Mill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)

OR103V 2x

Also for the pressure…

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

With this handle you can turn the steam pipe in and out without burning your fingers!

3/8" (16,66mm), Length 29mm

PL0900MV

Fork to clamp the filter holder under the grinder for the 2835, 3035 and 835 Retro.

PL0825FP

Includes 2 sockets (D101) for mounting the thermostat to the wiring.

FU0800

We also have any new insulation available.

Rubber that goes around the edge of the bean container hole in the lid/warming plate of the Quick Mill 2835 and 3035 series.

GO03035PT

3/8g thread

Clamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.

AC0900CB

SE05000V

SE05000

Suitable for both round and oval supports.

On the QM XX35, this switch is used to control the coffee grinder.

With the QuickMill 5000, this switch is for 1 and 2 cups of coffee and hot water.

This Push (or momentary switch)…

QuickMill 820, 835, 2820, 2835, 3000, 3002 and 3035

For all Quick Mill machines for ground coffee (except machines designed for PODS (filter holder has 2 "lips" instead of normal 3)

Material: Viton. Suitable for higher…

The ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.

This purifier, is filled with resin granules and works according to ion exchange.

The standard…

For all Quick Mill machines for ground coffee (including 'converted' machines)

AC0900DO

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill…

OT0520SL

PL0825PC

Quick Mill 835, 2820 & 2835

Set of 4 suitable for almost all espresso machines. We recommend attaching them with super glue or super glue for optimal attachment.

d.22mm
h.10mmQuick Mill GO03000PFN

Including:

2x o-ring spindle
2x o-ring steam pipeFor series steam pipe with 1 o-ring in the spindle and also for series that have 2 o-rings in the spindle.

The kit is without the valve, in most cases is it not necessary to…

For all Quick Mill ground coffee machines (except converted machines with a filterholder with 2 "lips") A stainless steel variant is also available

AL0900DDF

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill…

IN0810PA

Mounting hole 22x30 mm

Improved version for the Quick Mill ground coffee machine. The holes are much nicer distributed and the surface is even smoother. Another advantage is that the shower is a little less high, so you can dose just a little more. For…

Hose between brew group and steam tap 800, 2800 and 3000 series.

Note: do not forget to order the 2 o-rings, these must be replaced in the brew groep!

L 140mm

TU0820RSR / TU03035RSDE

AL0810DDF

Especially for QM810 machines which are transformed for the use of Pods to ground coffee.

Quick Mill: 810, 2810, 3010, 3012 and 3014

OT0900SD

Modern version with flat upperside

M6x1

Total length: 16,6mm

Length thread:11mm

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick…

Bracket to attach the steam pipe to the brew head of all new models with Quick Mill group.

Height 58mm, could be lower for olders models 800 series.

FE0900SRN

Quick Mill ground coffee

Depth 23mm

AC0800FI2

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

AC0800FI1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

Quick Mill ground coffee

Depth 25mm

AC0800FI2M

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

This filter ensures that you can also use ESE servings in your Quick Mill for ground coffee, the shape is better for ESE than the standard 1-cup filter basket for ground coffee. Just a little easier sometimes, but the result is…

For QM 2820, 2835, 3000 and 5000 series.

Please note that older QuickMill machines have a safety holder that is secured with screws, but unfortunately we no longer have this.

CON/CI10

For Euro cuttings and 2 fuses…

Enhance the look of your espresso machine with this Italian walnut wooden barrel. The thread is M12, suitable for most (semi-)professional espresso machines. To be sure, you can measure the thread diameter of the current handle.…

Defective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…

PL0825BUC

For all Quick Mill machines with built-in grinder (835, 2835, 3035 and EVO) and 060

Quick Mill. 105°C., for older models with grey thermoblock.

TE0900C

Quick Mill. 110°C., for modern models (>-`04)

TE0900CR/TE0820CR

Quick Mill 135°C.

TE0900V

Knon for the timer of the Quick Mill 3000 series. For the 3002 and 3012 dosamatic as well as the 2835, 3035 and 835 Retro. Includes screw to secure the knob.

PL03035MR

22x29x28mm diameter 10mm

5VA/5W 230V

For:

ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO

PL02835BR

Podmeter for the QM3000 series. For both the 3002 and 3012 dosamatic and the 0835/2835/3035 mill dosing. With wiring and plug so that it can be plugged into the printed circuit board.

PCPOT / PC3002

Expansion valve / membrane for the pump of the Quick Mill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8"bsp…

30x39,5x38mm diameter 13,4mm and 10mm

BDV08230AY ODE

AC02835GP

We have developed an improved version of the aluminum versio! This adapter disc is made of INOX and will not show any corrosion and gives a better temperature . The price is also much more interesting compared to the stainless…

AC01000AP
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso (3035)
-…

Standard 3-way valve for home espresso machines.

2x connection 1/8 F and 1x 7mm hose 220volt

Tip for mounting: connection no. 1 is always on the thermoblock connection.

Replaces valves from:

ODE LBA
OLAB 6000 and 9000…

A nice upgrade for the Quick Mill 2820 and 2835

By installing this OPV (overpressure valve), the pump pressure is limited to a maximum of 9 bar, otherwise the ULKA pumps go up to 16 bar. The OPV has a fixed pressure of 9…

If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…

43x26x7mm 3 holes RH

FE023MA

Quick Mill 2835/3035/0835/060/031

Old model 2820 en 2835

PL0900RE

165x90x135mm

Brass filter holder for Quick Mill group with single spout

OT0800PFC1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

Brass filter holder for Quick Mill group with double spout

OT0800PFC

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

OT0810RLN

Quick Mill 800 and 2000 series

Version of the EVO70 series with stainless steel pipe and 1 hole steam tip. The pipe is double-walled so that it does not get so hot and the milk does not burn the pipe.

This upgrade can be mounted in your 2800 or 3000 series…

AL0900GPL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

Quick Mill replacement filter holder made entirely of stainless steel, which stays cleaner and prevents wear on the handles. Comes with a 2-cup filter basket. Suitable as a replacement for the chrome-plated brass and classic…

Mot0835

MOT0835FI-R

220-230V DC

Complete circuit board for the Quick Mill with built-in grinder.

From 2020, a new type of printed circuit board will be delivered that is also used in the Evo series, it is interchangeable. For the older 835 with a button for 1…

230 Volt

AL0900SCL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill…