Solenoid valve 3-way complete Quick Mill
SKU: B407Complete kit to replace the solenoid valve in your Quick Mill, including couplings. The coupling on the pressure hose from the pump is self-flapping. Cut off the old brass flange. The nut of the new coupling goes over the pressure hose, then firmly press the hose onto the coupling and tighten the nut. A small amount of grease between the nut and the hose is recommended.
Not for models with a pressure gauge, such as the 3000 and 3035. In that case, you can order the three-way valve without the couplings and install them yourself.
We have a different replacement for the older type of valve with a large coil.
This valve can also be installed in the older 800 machine with a mechanical return valve and rotary switch on the left side of the machine. This job is only for the experienced DIYer and can be outsourced to us if in doubt. We recommend ordering a new hose and a coupling for the pump. Wiring with cable lugs is also required. See photo 3.
