Sleeve to secure the pressure hose in the pump diaphragm of Quick Mill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the Quick Mill's with an old model solenoid valve and also with the solenoid valve.
OT0800OV
Note: not for pressure pipe between steam tap and bottom plate, this is only available complete due to pre-pressing.
Pressure pipe between the pump membrane and the solenoid valve of the Quick Mill 810 and 820.
A new sleeve must be mounted on the side of the pump membrane: OT0800OV
On the solenoid valve side, this pipe can be secured with the…
Set of o-rings for sealing the pressure hose in the brew group for the Quick Mill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)
OR103V 2x
Also for the pressure…
-14%
Expansion valve / membrane for the pump of the Quick Mill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8"bsp…
